Dolphin CT60/CT60 XP Mobile Computer User Guide 83
• Ethernet HomeBase
• USB snap-on adapter
• RS-232 DEX adapter
For information on these accessories, contact your local sales representative.
USB Troubleshooting
• If you have a problem with your workstation computer recognizing the USB
device, try downloading and installing the Honeywell-aidc-usb-driver. The
driver is part of the Honeywell_Mobility SDK_Android software.zip file. To learn
where to get the software, see Developer Information on page 84.
• Check to make sure you have enabled the USB for file transfer. To learn more, see
Configure USB Connection and Transfer Files on page 22.
USB or Bluetooth Tethering for Data Connection Sharing
You can share your mobile computer data connection with another device through
a USB tethering or Bluetooth tethering connection.
Minimum requirements for USB Tethering
• The mobile phone must have an Android 9 OS or later.
• A CT60 compatible USB communication accessory.
Set up and Connection
1. Connect the USB communication accessory to both devices.
2. On the CT60, change the USB Preference setting from No data transfer to USB
tethering. See page 22 to learn how to change the USB Preference setting.
3. Swipe up from the bottom of the Home screen to access all apps.
4. Tap Settings > Network & internet > Hotspot & tethering.
5. Select USB tethering to initiate the shared data connection.
Note: To stop sharing the connection, tap USB tethering again to turn Off the feature or
disconnect the USB accessory.
Minimum requirements for Bluetooth Tethering
• All devices must support Bluetooth communication.
To Next Page
Loading...
