Honeywell Dolphin CT60 Series - Change the Battery Status LED Behavior

10 Dolphin CT60/CT60 XP Mobile Computer User Guide
The Battery status LED in the upper right corner of the computer indicates the
charging status of the battery.
Honeywell Battery LED Behavior (Factory Default/Out-of-Box Configuration)
Change the Battery Status LED Behavior
You can change the behavior of the Battery status LED if the out-of-box behavior
for a charging battery (blinking green) is not acceptable to your environment.
You can choose one of three options:
• Default Battery LED (optional Android OS configuration)
• Honeywell Battery LED (factory default, out-of-box configuration)
• No Battery LED
Use the Default Battery LED setting if you want the status LED to turn on steady
amber and then steady green when charging. To learn more about this option, see
Default Battery LED Behavior (Optional Android OS Configuration).
The battery is critically low. You need to replace the battery now or connect the computer
to a charging accessory.
The computer is connected to external power and the battery is charging.
There is a battery error. Install another battery. If the problem persists, contact Technical
Assistance.
Connected to Power LED State Description
No Blinking amber Battery level is below 20%
No Off Battery level is more than 20%
Yes Steady amber Battery level is between 0% and 60%
Yes Blinking green Battery level is between 60% and 95%
Yes Steady green Battery level is above 95%
Either Blinking red Battery error
Icon Status
Battery LED