Honeywell Dolphin CT60 Series - Repairs; Maintenance; Clean the Computer; About Disinfectant-Ready Models

Dolphin CT60/CT60 XP Mobile Computer User Guide 99
Repairs
Repairs and/or upgrades are not to be performed on this product. These services
are to be performed only by an authorized service center (see Customer Support on
page ix).
Maintenance
Your device provides reliable and efficient operation with a minimum of care.
Although specific maintenance is not required, the following sections describe
periodic checks to ensure dependable operation.
Clean the Computer
The computer housing, scanner window, camera window and touch screen may be
cleaned with a soft cloth dampened with water or a mild detergent-water solution.
If a mild detergent solution is used, wipe the computer with a clean cloth
dampened only with water to remove any detergent residue.
Note: Reading performance may degrade if the scanner window is not clean. If the window
is visibly dirty, or if the scanner is not operating well, clean the window.
About Disinfectant-ready Models
Some configurations of the CT60 computer are available with an external plastic
housing that is designed to resist the effects of harsh chemicals. These scanners
are equipped with disinfectant-ready housings (DRH) for the general-purpose
markets.
Please refer to the Honeywell Safety and Productivity Solutions website for specific
details on how to clean the CT60 computer with disinfectant-ready housings.
Helpful information on the care of these specialty products can be found in the
following article:
• Learn to Clean Honeywell Healthcare Disinfectant-Ready Products
Caution: Do not submerge the computer in cleaning solution.
Do not use abrasive wipes or cloths on the windows or touch
screen. Abrasive wipes may scratch the windows and touch
screen. Never use solvents (e.g., acetone) on the housing or
windows. Solvents may damage the computer finish, the
windows or touch screen.
Caution: Ensure all components are dry prior to mating the computer
with charging accessories or other peripheral devices. Mating
wet components may cause damage not covered by the
warranty.