d. Combined Active power (|+A|+|-A|) minimum for the power system. Toggle to the
minimum power option using Up/Down arrow buttons in the ‘Monitoring’ menu and
press SET to check the values.
▪ Provides the cumulative () minimum active power reading (|+A|+|-A|).
e. Net Active power (|+A|-|-A|) minimum for the power system. Toggle to the minimum
active net power option in the Min menu by pressing Up/Down arrow buttons to check
the values.
▪ Provides the cumulative () net minimum active power reading (|+A|-|-A|).
3. Average - Provides the average values for the voltage and current in per phase and active
power. Toggle through the monitoring menu options to select the Average option and
press SET to check the values.
a. Line to Neutral voltage – Press SET button to go back to the menu option.
To Next Page
Loading...
