HONEYWELL EMERGENCY NOTIFICATION MANAGER
MAINTENANCE PROCEDURES
The system must be maintained in accordance with the
system documentation and procedures and practices
contained in applicable NFPA and UL standards. The
Honeywell Mass Notification System has no user replaceable
fuses. For service in the event of trouble, contact your local
Automation and Control Solutions office as listed in the phone
book, or contact a regional office as shown at the end of this
document.
It is recommended that the system test frequency is once per
year.
HONEYWELL
®
IS A REGISTERED TRADEMARK AND ENTERPRISE BUILDINGS INTEGRATOR™ IS A TRADEMARK OF HONEYWELL INC.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com/buildingsolutions
® U.S. Registered Trademark
© 2015 Honeywell International Inc.
39-00008-1 HBS Rev. 1-15
Printed in U.S.A.
To Previous Page
Loading...
Need help?
General
