Honeywell EBI XLS MASS NOTIFICATION SYSTEM - DVC-RPU; SET THE PAGING LEVELS:

HONEYWELL EMERGENCY NOTIFICATION MANAGER
39-00008-1
24
In the PAM Programming Service, add the Logic Zone created in Fig. 31 to all the fire PAM points.
Fig. 32. Add the Fire Active Tone logic equation to fire PAM points
DVC-RPU
SET THE PAGING LEVELS:
In the COMMON RPU Prog. Service screen in DVC
programming:
Select the Paging Levels to enable the ALL CALL buttons in
the second column of the DVC-KD.
Addressing: DVC-RPU address must equal the LCD-160
address. See "LCD-160” on page 25.
Fig. 33. Set Paging Levels - VeriFire Tools