ES-200X Series Manual — P/N LS10131-000FL-E:C 7/25/2018 13
Section 1: Product Description
The Fire-Lite ES-200X is an addressable FACP (Fire Alarm Control Panel) with a pre-installed communicator card that is compact, cost
effective, intelligent, and has an extensive list of powerful features.The combination of Fire-Lite’s newer series devices and legacy 300
Series devices, along with the ES-200X FACP, offer the latest in fire protection technology. The power supply and all electronics are
housed in a metal cabinet, providing a complete fire control system for most applications. Optional modules, which plug into the main
circuit board, are available for special functions. Available accessories include multi-technology central station communicators, LED,
graphic, and LCD annunciators, reverse polarity/city box transmitter, local and remote upload/download software, and remote power
expansion.
The ES-200XC is a ULC-listed Canadian version of the FACP which offers the same features as the ES-200X, but is supplied standard
with a dress panel. Refer to “Canadian Option” on page 79 for a full description.
Inventory
When ES-200X shipment is received, check that all parts have been included in shipment. The ES-200X shipment consists of one of
each of the following:
main circuit board with display
backbox with door
plastic bag containing screws, cables, ELRs, terminal blocks, etc.
1.1 Features and Options
• Pre-installed IPOTS-COM Ethernet IP and POTS (Plain Old Telephone Service) Central Station Communicator
• Optional CELL-MOD(C) or CELL-CAB-FL GSM Central Station Communicator over AlarmNet
• Automated activation of the ECC-50/100 Emergency Command Center
• ECC-FFT Firefighter Telephone option
• Compatible with SWIFT® wireless devices
• LiteSpeed™ polling protocol for faster SLC response time
• SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode with twisted, unshielded wire (refer to “Wire Requirements” on
page 143)
• Single addressable SLC loop which meets NFPA Class A, Class B, and/or Class X requirements
• 198 addressable device capacity (99 detectors and 99 control/relay/monitor modules)
• 99 software zones
• Four (4) Class B or four (4) Class A NAC (Notification Appliance Circuits) circuits - special application power
• 3.0 amps total 24 VDC output circuit current in alarm condition
• NAC power expandable by 3.0 amps with optional PWRMOD24 module
• Four programmable function keys for ease of maintenance
• Two programmable relay outputs and one fixed trouble relay
• Synchronization output for remote power supply applications (special application)
• Built-in Programmer
• 80-character LCD display (backlit)
• Real-time clock/calendar with daylight savings time control
• History file with 1,000 event capacity
• Addressable sounder base compatibility
• Multi-criteria detector (smoke, heat, CO) with programmable response
• Advanced fire technology features:
Automatic drift compensation
Maintenance alert
Detector sensitivity test capability (NFPA 72 compliant)
Automatic device type-code verification
Point trouble identification
• Waterflow selection per module point
• Alarm verification selection per detector point
• Walktest, silent or audible
• PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA 72 compliant)
• Silence inhibit timer option per NAC
• Autosilence timer option per NAC
• Continuous, March Time, Temporal or California code for main circuit board NACs with two-stage capability
• Selectable strobe synchronization per NAC
• Remote Acknowledge, Alarm Silence, Reset and Drill via addressable modules or ANN-80/ANN-100 Remote annunciator
• Auto-program (learn mode) reduces installation time. Reports two devices set to the same address
• Password and key-protected nonvolatile memory
• User programmable password
• Fully programmable from local keypad
NOTE: Unless otherwise specified, the term ES-200X is used to refer to all versions of the panel.
To Next Page
Loading...
