Honeywell Fire-Lite Alarms ES-200X - ANN-RLY Annunciator Module

ES-200X Series Manual — P/N LS10131-000FL-E:C 7/25/2018 45
Optional Module Installation Installation
ANN-RLY Annunciator Module
 Specifications
• Operating Voltage: 24 VDC
• Max. Current:
 Alarm: 75 mA
 Standby: 15 mA
• Operating Temperature: 32°F to 120°F (0°C to 49°C)
• For indoor use in a dry location only

Mounting/Installation
The ANN-RLY relay module can be mounted inside the FACP main circuit board chassis or inside the ROME Series enclosure. Refer to
the ANN-RLY Installation Document #53033 for instructions on chassis mounting or to the ROME Series Installation Document #53530
for mounting in the separate backbox.
mounting holes
mounting hooks through
mounting slots
grounding wire
ANN-RLY
ANN-MBRLY
mounting bracket
mounting holes
mounting holes
FACP Backbox Installation
using ANN-MBRLY mounting bracket
FACP Chassis Installation
mounting holes
mounting holes
ANN-RLY on
ANN-MBRLY
mounting bracket
ROME Series Installation
using ANN-MBRLY mounting bracket
Figure 2.28 ANN-RLY Mounting Options