Galaxy Programming Manual
6
User Access
3. That all of the access doors (controlled by the on-line MAX) are closed. If any of the access doors
are open, then the exit procedure is halted until all of the doors are closed.
4. That there are no power failures on the galaxy system, such as AC fail, fuse fail or battery fail
Aborting the Exit Engineer Mode Procedure
If the esc key is pressed at any point while engineer mode is being exited, before the normal banner is dis-
played, the exit procedure is aborted and the system returns to the engineer banner.
Multi User Access
The Galaxy 60, 128, 500, 504 and 512 allow multi-user access. A maximum of 4, 8, 8, 16 and 16 users
respectively can simultaneously carry out tasks on the system.
The Galaxy 8 and 18 only permit single-user access.
To Next Page
Loading...
Need help?
General
