Galaxy Programming Manual
138
Option 59 – Quick Menu
The Galaxy quick menu consists of up to 10 menu options that are accessed by all level 3 (and above) user
codes that do not have a ✴ assigned to their code level. This option allows the quick menu to be repro-
grammed to any selection of the menu options. The Quick Menu defaults to a factory selection as shown in
the following Table:
Table 24. Quick Menu Options
Modifying the Quick Menu
On selecting the Quick Menu option, the details of the first option assigned to the quick menu are displayed;
this includes the quick menu location, the menu option assigned, the full menu option number and the current
user level assigned to the option.
Select the quick menu number to be modified by entering the option number 0 – 9 or by using the A and B
keys and then pressing ent. The display indicates the quick menu location and the full menu option number
currently assigned.
To modify the quick menu, enter the full menu option number 11 – 59 or press the A and B keys until the
required menu option is displayed; press the ent key to accept the selection and return to the previous menu
level. To delete a quick menu option, press the ✴ key instead of a menu option number; ✴✴=NOT USED is
displayed.
The system arranges the quick menu in order of lowest user level access required, therefore if quick menu
number 0 is assigned a menu option which is of a higher access level than options 2, 3 and 4, the menu is
rearranged and the display indicates that the option is now number 4.
NOTE: Assigning duplicate quick menu options is denied. The message DUPLICATE ENTRY is displayed
and the system prompts for a new option to be assigned.
59 - Quick Menu
Menu Options
Quick Menu location
Full Menu option number
User level
0=OMIT ZONES
Option=[11] L=3
noitpOuneM
resU
leveL
0senoZtimO113
1teSdecroF413
2emihC513
3senoZyalpsiD124
4goLyalpsiD224
5tnirP424
6tseTklaW135
7etaD/emiT146
8sedoC246
9remmuS346
To Next Page
Loading...
Need help?
General
