Galaxy Flex Installer Manual Communications [56]
135
ISDN module [56.3] (continued)
04 = ISDN Snatch
1 = Hardware
1 = Always Snatch
2 = Never Snatch
3 = Snatch if Line Fail
2 = Software (1 = Disable, 2 = Enable)
05 = Autotest
1 = Start Time
2 = Intervals - 0 - 99 hours
3 = Int. Test (0 = Disabled, 1 = Enabled)
4 = Group Condition
06 = Engineer Test
07 = Line Fail
1 = None
2 = Line Vols Only
3 = Layer 1 Only
4 = Volts and Layer 1
5 = Volts or Layer 1
08 = Fail to Comm
09 = Remote Access
1 = Access Time
1 = Off
2 = All Unset
3 = Any Set
4 = Any Time
2 = Mode
1 = Direct Access
2 = Manager Authorize
3 = Call Back
10 = Alarm Monitoring
1 = Trigger (1-20)
2 = Phone Number
3 = Account Number
To Next Page
Loading...
