Honeywell Galaxy Flex - Codes [42, Quick Menu 7]

Codes [42, Quick Menu 7] Galaxy Flex Installer Manual
50
Codes [42, Quick Menu 7]
Codes menu
42 = Codes

 1 = User Codes (enter a user code)
 
  1 = Modify PIN (4, 5, 6 digit PIN)
 
  2 = Modify Level (0 to 6)
 
  3 = Modify Name (6 alpha-numeric characters)
 
  4 = Schedule (00 = None)
 
  5 = Modify Groups
 
  6 = Card Number (access control card or fob 10-digit number)
 
  7 = MAX Function (required menu option number)
 
  8 = MAX Keypad (the keypad address that displays the MAX function)
 
  9 = Template
 
  10 = Radio Fob

 2 = Card Users

 1 = Add Batch

 2 = Test Batch

 3 = Delete Batch

 4 = Batch Start

 5 = Batch End

 6 = Batch DCM Rdr

 7 = Template User
Use the Codes option to assign, modify and delete the codes that allow users to operate and
access the system. The Codes option is divided into two sub-menus:
 User Codes - sub-divided into 10 menus that determine all of the access information for
users who require PINs (depending on panel used and whether the group (Option
[63])and Acess mode (Options [69])options are enabled. This option also assigns MAX
details to user numbers.
 Card Users - determines the tags/cards on the system for various users.
Default Codes
The system has three default codes: Manager, Engineer and Remote User.
No. of Codes Manager Engineer Remote User
Default PIN User No. Default PIN User No. Default PIN User No.
100 1234 98 112233 99 543210 100