Honeywell Galaxy Flex - Page 179

Galaxy Flex Installer Manual Access Control [69]
179
69 = Access Control (continued)

 3 = DCM

 1 = DCM Parameters MAX DCM (select)
 
  1 = Descriptor ABCDE_ (9 characters)
   
  3 = System Group
   
  5 = Reader (01 or 02)
 
  01 = Descriptor (ABCDE_ 9 characters)
 
  02 = Relay Duration - 0-60 seconds (default = 05)
 
  03 = Open Timeout - 1-60 seconds (default = 10)
 
  04 = Group Config
   1 = Alarm Group
   2 = Group Restrict
   3 = Exit Group
 
  05 = Emergencies 0 = Disabled, 1 = Enabled
 
  06 = Security
   1 = Nightlock 0-4 weekly schedules
   2 = Unlock Time 0-4 weekly schedules
   3 = Dual Mode
    1 = Disabled
    2 = Card and Card
    3 = Card and Pin
  
   4 = Dual Time - Option not available
 
  07 = Menu Recall
 
  1 = Menu Function 11-72 (** = not used)
 
  2 = Menu Mode
   1 = Triple Repeat
   2 = Recall Button
 
  3 = Keypad ** - Keypad
 # = Enable

 2 = Card Format

 0 = 26bit

 1 = Crp 1K 35bit

 2 = 37bit no FC

 3 = Northern 34

 4 = Custom

 1 = Format Name

 2 = Card Length
 1 = 26 Bit, 2 = 27 Bit, 3 = 32 Bit, 4 = 34 Bit
 5 = 35 Bit, 6 = 37 Bit,7 = 40 Bit

 3 = Card Number
 1 = Start point
 2 = Field Length