Remote Access [47] Galaxy Flex Installer Manual
64
4 = Auto service (continued)
5 = Control Upload
1 = Eng Prog
2 = User Prog
3 = Either
6 = Remote Maint
1 = Schedule 000 (0-365) days
2 = Advice
1 = Code Only
2 = Code + Notice
3 = No Code/Notice
7 = Service PIN
8 = Send Panel ID
1 = Name
2 = Schedules
9 = Delay Time 10 (3-10) secs
5 = SMS Paging
1 = Int Telecoms
1 = Mobile No.1
2 = Mobile No.2
3 = Mobile No.3
2 = GSM
1 = Mobile No.1
2 = Mobile No.2
3 = Mobile No.3
Service [47.1]
Use this option to control the access mode of the remote servicing package. You need type 6
status to use this option.
INT Telecoms [47.1.0]
Use this option to select the onboard telecoms as the communication device.
INT Telecoms Direct Access [47.1.0.0]
ISDN Direct Access [47.1.1.0]
Ethernet Direct Access [47.1.2.0]
GSM Direct Access [47.1.3.0]
When you select one of these options, a 40 minute remote access period is enabled on the
panel. Once access to the panel has been gained, it can be maintained indefinitely.
When the remote servicing connection is terminated, the access period remains valid for an
additional 15 minutes.
To Next Page
Loading...
Need help?
General
