Galaxy Flex Installer Manual Parameters [51]
71
Parameter list
Parameter Groups SC01
Parameter Groups SC01
01 = Bell Time
35 = Fail To Set
02 = Bell Delay
41 = Weekend Work not available
03 = Abort Time
43 = Timer Access not available
04 = Exit Time
46 = Res. Select not available
05 = Entry Time
47 = Set Confirm not available
06 = System Reset
48 = Alarm Limits not available
07 = Tamper Reset
49 = Confirm Time not available
08 = No. Re-arms
54 = Keypad Access not available
09 = Omit All
55 = Confirm not available
10 = Key '0' not available
56 = Force Restore not available
11 = Local Part
58 = Power Alarm not available
12 = Banner not available
59 = Part Tone not available
13 = PA Delay
60 = RF Parameters not available
14 = KEY/SW Level not available
61 = Activity Mon not available
15 = System Text not available
62 = Lockout not available
16 = Soak Time not available
63 = Banner alerts not available
17 = Restart not available
64 = Set Override not available
18 = Stop Set not available
65 = Reset Levels not available
19 = Part Alarm
66 = Min Pin Size not available
20 = Power Delay
68 = Line Fail not available
21 = Reset Mgr. not available
69 = Alert Inds not available
22 = PA reset
70 = SWDC Set Dly not available
24 = Exit Alarm
71 = MF BL Enable not available
27 = cct Debounce not available
72 = Max Alm Cause not available
28 = Online print not available
73 = Guard Unset not available
29 = Online level not available
74 = Back-up Link not available
30 = Video
75 = Back-up Timer not available
32 = Show Alarms not available
76 = MAX LEDs Off not available
33 = Secure Code not available
77 = Duress User not available
To Next Page
Loading...
Need help?
General
