Galaxy Flex Installer Manual System architecture
9
There are three models in the Galaxy Flex range. Flex can support the type and number of
modules shown in Figure 2 above and the following table:
Table 1 Flex specifications
The information in the rest of the manual will refer to the Flex 100. The limitations of the
Flex 20 and Flex 50 shown in the table above must be considered where appropriate.
Quantity
Panel model Flex 20 Flex 50 Flex 100
RS485 Lines 1 1 1
Zones (onboard) 12 12 12
Zones (maximum) 20 52 100
Outputs (onboard) 3 3 3
Outputs (maximum) 7 23 47
PSU (overall) 1A 1A 1A
PSTN onboard Yes Yes Yes
USB port onboard Yes Yes Yes
User Codes 23 48 98
Groups 3 4 8
Event Log 500 500 1000
Access Log 500 500 1000
Schedules (Timers) 2 4 4
GSM/GPRS module Optional Optional Optional
Ethernet module Optional Optional Optional
ISDN module Optional Optional Optional
Keypads 4 4 8
Keyprox 4 4 8
Audio interface Optional Optional Optional
TouchCenter 1 1 1
RIO / Power RIO 1 5 11
RF Portals (C079-2) 8 8 8
Door Control (DCM) 2 4 4
Max4 4 8 8
Printer I/F Optional Optional Optional
To Next Page
Loading...
Need help?
General
