Granit XP User Guide 43
Page Button
When you press the page button on the base or Access Point, the scanners associ-
ated with that base or Access Point will begin beeping (3 short and 1 long beep). If
you press the trigger on a scanner that is beeping in response, or press the page
button on the base or Access Point a second time, all associated scanners will stop
beeping. See Page on page 50 for further information about page button settings.
Temporary Streaming Presentation Timeout
Set a timeout for the length of time the illumination remains on and searching for
barcodes when using Temporary Streaming Presentation Mode. Set the length for
the timeout by scanning one of the barcodes below. Default = 10,000 ms (10 sec-
onds).
To Next Page
Loading...
