Performance Series HQA Digital Video Recorder Local User Guide
116
Figure 12-1
2. On the General tab, configure the following settings:
• Device Name Enter a device name for the DVR.
• Device No. Enter a device number for the DVR.
• Language Set the language of the user interface.
• Video Standard Set the video standard to NTSC or PAL.
• Instant Play Play back the previous 5 to 60 minutes of recorded
video.
Note: The playback time is set to 5 minutes by
default.
• Auto Logout Set the length of time the DVR waits before logging
out an inactive user. Specify a time between 0 and
60 minutes. The default setting is 10 min.
• Navigation Bar Select the check box to display the live view toolbar
on the live view screen. Clear the check box to hide
the live view toolbar.
• IPC Time Sync input an interval here to synchronize the DVR time
with the IPC time.
• Startup Wizard Select the check box to display the Startup Wizard
at startup. Clear the check box to bypass the
Startup Wizard at startup.
• Mouse Sensitivity Set the desired mouse speed using the slider.
• Validity Period of pass… Enter the Validity Period of password.
To Next Page
Loading...
