Honeywell MIWI350 - 10.2.3 Wiring AC DC Power for MIWIPCB

|59
10.2.3 Wiring AC DC Power for MIWIPCB
Figure 10-13: Electrical Wiring - AC-DC POWER 120VAC TO 15V DC ADJ WITH 7Ah/21Ah BATTERY
Cable
(Part#)
Connects To
40-6169-4
Connector from Solar Charge
controller
Power Distribution Board P1 (DC-IN)
Power Supply source 120VAC/15V DC Din Rail
Mount.
40-6186 External power input terminal block
Power Supply source 120VAC/15V DC Din Rail
Mount.
40-6169-2
Connector from Solar Charge
controller
12V 21Ah lead-acid battery
40-6169-3
Connector from Solar Charge
controller
12V 7Ah lead-acid battery
40-2342-1 Device Ground/Earthing External Power Input Terminal Block
Note: Refer Section 4.3.1 for Power input cable glands and torque to be applied.
10 Reference Drawings