Honeywell MIWI350 - 350 S Audit Trail Log Support for Cloudlink MODEM

|73
12 350S Audit Trail Log support for CloudLink MODEM
With this feature support the user can configure the CloudLink items (item series 3000) in the Audit Trail
records of the 350S to monitor the MODEM parameters.
There are certain string item limitations which have to be noted to understand the behavior of the AT log
record readings.
The below table shows the list of string items as they are logged and the limitations in the AT logs:
ITEM
NUMBER
ITEM DESCRIPTION
POSSIBLE
VALUE
AUDIT TRAIL LOG VALUE
3004 CloudLink Radio IMEI number
19 character
string
Last 8 characters
3029 CloudLink SIMSerial Number
20 character
string
Last 8 characters
Example: If SIM Serial Number is 89619280910007075154 then, AT log value will be stored as
07075154.
3037
Primary IP Address for Alarm/Magnet
Callin
IPv4 format Last two blocks as float
3039
Alternate IP Address for
Alarm/Magnet Callin
IPv4 format Last two blocks as float
3042 CloudLink Ping Server IP/DNS IPv4 format Last two blocks as float
3045-3054
CloudLink White List IP Address 1 -
10
String Last two blocks as float
3059 CloudLink IP Address IPv4 format Last two blocks as float
3095 CloudLink RUID1 String Last 8 characters
3110 CloudLink Server Mode IP Address IPv4 format
The last two blocks as float
Example: If the IP Address is 251 . 230 . 1 . 1 then, AT log value will be stored as 1 . 1
3125 CloudLink Last Call Cell ID String
Decimal coded hex number
and stores the last 8 digits
Example: If F42F is the CloudLink Cell ID then,
F - 15;
4 - 04;
2 - 02;
F - 15
so, AT log will be stored as 15040215.
3126
CloudLink Last Call Cell Location ID
(Applicable for CLR100 only)
String
Decimal coded hex number
and stores the last 8 digits
Example: If 13CB is the CloudLink Last Call Cell ID then,
12 350S Audit Trail Log support for CloudLink MODEM