AMPS-24 Manual — P/N 51907:J2 02/26/2014 15
In an EQ Series Backbox Installation
2.2 In an EQ Series Backbox
The AMPS-24 mounts on a CHS-6 chassis into any EQ Series cabinet row. It will require the left
two of the three chassis spaces.
WARNING: Risk of equipment damage!
Refer to the Heat Dissipation Calculation Document to determine the acceptable heat dissipation in
the EQ Series cabinets when digital audio products are present.
Figure 2.2 EQ Series Backbox
Fasten the power supply to the chassis
with two # 4-40 hex nuts, included.
(P/N 36045) at these positions.
CHS-6 Chassis
EQ Series Cabinet
To Next Page
Loading...
