AMPS-24 Manual — P/N 51907:J2 02/26/2014 17
In a BB-200 Cabinet Installation
2.5 In a BB-200 Cabinet
The AMPS-24 mounts in a BB-200 cabinet with four 100 amp-hour batteries (two on the top shelf
and two on the bottom). The power supply is fastened directly to the unpainted section of the
backbox with two keps nuts.
BB200_AMPS24_4Battb.wmf
Figure 2.5 BB-200 Mounting
Fasten the AMPS-24 chassis to the backbox using the two
supplied #4-40 keps nuts (p/n 36045) at these positions.
WARNING: Heavy Load!
The total weight of a fully loaded BB-200 will exceed 300 pounds. Additional support may be required
when mounting this cabinet to a wall.
See BB-100/200 Cabinet Installation Instructions for more information.
To Next Page
Loading...
