Honeywell Notifier NFS2-640 - Page 65

74 NFS2-640 Operations P/N 52743:L4 06/10/19
Remote Terminal Access Using the CRT-2 for Alter Status
C.4.5 Clear Verification Counter
Clear verification lets you clear the verification counter for all the addressable detectors in the sys-
tem.
C.4.6 Clear the Entire History Buffer
Clear History lets you clear the entire History buffer.
C.4.7 Set the Pre-Alarm for Alert or Action
Set Action/Alert lets you set the Pre-alarm for Alert or Action. For example, change Pre-alarm
from “Alert” to “Action” as follows:
STATUS CHANGE Clear verify count 08:29A Tue 04/15/15
Press <3><
ENTER>
***************History Clear*************************
Press <4><
ENTER>
Set Pre-alarm Alert (NO)/Action(YES). Type N or Y then Enter
STATUS CHANGE Change Alert/Action 08:29A Tue 04/15/15
Press <5><
ENTER>
Pre-alarm now set for ACTION
Press <Y><
ENTER>