Honeywell S4-34440-12 - Output with Fire input mode; Output; Confirmation Input mode

Output with Fire input mode
This is when a channel is configured as an output and the channels input terminals are Fire Input.
Mode settings notes
Output / Fire input Output Type See page 4.
Sync. pulse See page 4.
Failsafe See page 4.
Mains failure See page 4.
Input Delay See page 6.
Input normally See page 6.
Output normally See page 4.
Output / Confirmation Input mode
This is when a channel is configured as an output and the channels input terminals are Confirmation Input.
Mode settings notes
Output /
Confirmation input
Output type See page 4.
Sync. pulse See page 4.
Failsafe See page 4.
Mains failure See page 4.
Associated output See page 7.
Normal delay See page 7.
Conf. delay See page 7.
Input normally See page 6.
Input type See page 7.
Output normally See page 4.
Commissioning information S4 Mains powered interface unit
10 4188-968 issue 2_Part 2_09-10_S4 mains interface
www.acornfiresecurity.com
www.acornfiresecurity.com