EasyManuals Logo

Honeywell ScanPal EDA50K User Manual

Honeywell ScanPal EDA50K
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
1. Features of ScanPal EDA50 Enterprise Hybrid Device
ScanPal EDA50 Enterprise Hybrid Device User Guide 13
Checking the remaining battery capacity
Except for the battery icon and power indicator, you can also get the battery
capacity information from Settings.
1. Tap All Applications > Settings
2. Tap Battery. The current percentage of remaining battery capacity and the
remaining time will be displayed. The list will present the power consumed
by each application and service. For detailed usage information, please tap
the respective applications and services in the list.
Battery life and maintenance
Tips for battery maintenance
The expected life of the battery is approximately 500 cycles, or about two years,
if care is taken in charging. Follow these guidelines to maximize life span.
When this happens
Do this:
The low power icon is
displayed or the power
indicator lights when the
terminal is in use
Power off the terminal. Long press the
power key and choose Turn Off.
The terminal is to be charged
unused overnight or over a
weekend
Power off the terminal to maximize battery
cycle lifespan.
The terminal is to be charged
while in use
Once it is close to a full charge, avoid
continuously charging the terminal while
operating to maximize lifespan. Remove the
terminal from the charging source during
operation. See the chapter onCharging
While in Use for more information.
The terminal will be unused
for more than a few minutes
Make sure the low power icon and power
indicators are not on. Switch to sleep mode
by pressing the Power key.
The terminal will be stored for
more than one day
The battery will discharge slowly if it is
removed from the terminal.
To store the terminal for several days (such
as a weekend), install a fully charged battery
or connect the terminal to the power supply
and turn off the terminal.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell ScanPal EDA50K and is the answer not in the manual?

Honeywell ScanPal EDA50K Specifications

General IconGeneral
HDD capacity128 GB
Audio (L/R) in1
Composite video in0
DVI-D ports quantity5
DVI-I ports quantity4
USB 2.0 ports quantity8
Ethernet LAN (RJ-45) ports-
Component video (YPbPr/YCbCr) in7.5
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1.9
Display diagonal4 \
External displayNo
Touch technologyMulti-touch
Touchscreen typeCapacitive
Display resolution480 x 800 pixels
Flash memory16 GB
Internal memory0.002 GB
Compatible memory cardsMicroSDHC
Maximum memory card size32 GB
Processor familySnapdragon
Processor frequency1.2 GHz
Processor manufacturerQualcomm
Operating system version4.4
Operating system installedAndroid
Data networkEDGE, GSM, LTE, WCDMA
Wi-Fi standards802.11a, 802.11b, 802.11g
Bluetooth version4.0
GSM bands supported900, 1800 MHz
Security algorithms802.1x RADIUS, AES, EAP-TLS, EAP-TTLS, TKIP, WEP, WPA, WPA-PSK, WPA2
WCDMA bands supported900, 2100 MHz
Rear camera resolution (numeric)5 MP
Storage temperature (T-T)-20 - 60 °C
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Battery voltage3.8 V
Battery capacity4000 mAh
Battery life (max)12 h
AC adapter output current2 A
AC adapter output voltage5 V
Battery recharge time (off)4 h
Product colorBlack
Keyboard layoutAlphanumeric
International Protection (IP) codeIP54
Weight and Dimensions IconWeight and Dimensions
Depth24.5 mm
Width73 mm
Height164 mm
Weight300 g

Related product manuals