4. Using Telecommunication Function
48 ScanPal EDA50 Enterprise Hybrid Device User Guide
Answering a call
When a user receives an incoming call, the screen will be illuminated with the
caller's number displayed. All calls are recorded in the call log. If you have
missed calls, you will receive reminding notifications.
When there is an incoming call, tap the white phone icon and slide to any one of
the following icons:
• Answer the call:
• Hang up:
• Send a message from the default list:
Switching applications during a call
Users can switch applications during a call. For example, users can use the
Contacts application to find contact information during a call.
Note: If the user only has WWAN connection, the applications requiring
data connection may not be able to obtain network data during the call.
Due to restrictions from network carriers, you can not receive multiple
simultaneous calls and connections and voice calls will get priority. For
more information, please contact your network carrier.
During the call, tap the icon of other applications on the main interface or
application interface to run the application, while the green call icon shows in the
status bar.
Making an emergency call
Users can still make emergency calls even if the user's SIM card for his UMTS
phone is lost or he has no effective CDMA accounts. In both cases, the phone
will show that you are out of service, however, if you dial an emergency phone
number (such as: 112,911,000,08,118,119 or 999), you will get connected.
Configuring call settings
Users can customize phone settings, including ringtones, voice mailing options,
key tone, intercom settings and other options.
1. Tap .
2. Tap Settings to show Call Settings menu.
3. Change the settings based on your needs.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
