3. Scan Function
38 ScanPal EDA50 Enterprise Hybrid Device User Guide
Define the character to be added in front of the decoding barcodes
Define the character to be added at the end of the decoding barcodes
Specify a free plug-in for data editing
Specify a character prefix to decode the barcode data
• None
• Honeywell
• AIM
To open or close URL barcode, if the barcode start with http:// or https://,
the browser will open the respective URL
The related BarCodeReader attributes:
PROPERTY_DATA_PROCESSOR_LAUNCH- BROWSER
Enable or disable scan processing for specified targets. Apply the barcode
as the follwing format
‘//’ ACTION
‘//’ intent-suffix ‘$’ extra-data
Where:
Additional operations and data include the following characters, to enable
Intent or respective applications
Intent action:
“com.honeywell.scantointent.intent.action.”+ ACTION
Intent extra
“com.honeywell.scantointent.intent.extra.DATA” contains the remainder of
the bar code data after the first ‘$’ character.
The related BarCodeReader attributes:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTE N T