6. Terminal configurations
58 ScanPal EDA50 Enterprise Hybrid Device User Guide
3. To quickly connect to a network via WLAN Protected Access (WPS), tap
. To search the network outside of the list, tap and enter the network
name.
4. Tap on a network name to view its details.
If the network is secure, a form will pop up asking you to fill in the necessary
information (for example: certificate name, password or other credentials).
To connect to a secure network, enter the required information, and then
tap Connect.
• To leave the network that has been connected, tap Forget. For
example, users can choose to forget a network that they won't use
again.
• To close the network information screen, tap Cancel.
Configuring Wi-Fi network proxy servers
If users need to connect to network resources through a proxy server, they need
to configure a proxy server for each Wi-Fi network added. By default, none of
the Wi-Fi networks added by users has done proxy server settings.
To Next Page
Loading...
