Honeywell ScanPal EDA51 User Manual

P10
Replacing batteries
When the battery power is low, you can charge it together with the terminal, or replace it with a fully-charged
battery.
1. Save all the files and close all running Apps.
2. Long press the power button. Until the follow interface pop up:
3. Tap Power off.
4. EDA51-X will power off directly.

Honeywell ScanPal EDA51 Specifications

General

Data Capture	1D/2D Barcode Scanner
Processor	Qualcomm Snapdragon 450 octa-core 1.8 GHz
Display	5-inch, 1280 x 720 High Definition
Battery	4000 mAh
Camera	13-megapixel color camera
Connectivity	Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 4.2
Dimensions	157 mm x 78.2 mm x 16.9 mm
Weight	272 g
Operating Temperature	-10°C to 50°C
Storage Temperature	-20°C to 70°C
Operating System	Android 8.1 (upgradeable to Android 10)