Honeywell Sensepoint XCD RFD - Magnetic Wand Activation; Operation Mode Structure

Sensepoint XCD RFD Technical Manual SPXCDHMRFEN Issue 4_08-2016
26
8.3 Magnetic Wand Activation
The magnetic wand is used as a tool to allow the user
to communicate with the Sensepoint XCD RFD transmitter.
Communication with the XCD RFD is achieved by positioning
the Magnetic Wand at one of three different positions on
the front glass window of the Sensepoint XCD RFD transmitter.
Activation of the switches is veried by observing
the Magnetic Wand Activation Icon on the LCD display
Hold the Magnetic Wand in position for up to 2 seconds =
Hold the Magnetic Wand in position for 3 seconds or more =
8.4 Operation Mode Structure
Sensepoint XCD RFD has 3 operating modes.
1. Monitoring mode, is the normal operating status while XCD RFD measures and
displays gas concentration. The fault/warning status is periodically checked, relay
contacts are activated according to the conguration.
2. Conguration mode, this mode allows parameters relating to the conguration of
the Transmitter functions to be changed according to specic needs. This mode can
be protected by a password mechanism to prevent unauthorised changes being
made.
3. Review mode, allows the user to view the current conguration settings.
Diagram 11: Mode Structure
Further details of the information available and conguration options for the Sensepoint
XCD RFD can be found in Section 13. of this manual.
Start - Up
Configuration
Mode
Review
Mode
Monitoring
Mode