Cleaning
On an annual basis, maintenance is required to ensure TrueDRY runs at peak efficiency.
TrueDRY™ DR65 Dehumidication System 69-2089EFS—14 11
1 2
3 4
Unplug TrueDRY DR65 before beginning
service. Press down on the quick-release
button and lift the duct collar.
Remove duct collar to access filter.
Remove filter (50049537-005) and replace
with new filter.
5
When service is complete, initiate a call
for dehumidification and check that the
compressor and fan activate. If using
the VisionPRO IAQ or TrueIAQ controls,
reset maintenance reminders.
Check the drain connection and drain
line to ensure it is clear of debris and
sludge. Ensure all hose connections are
secure once maintenance of the drain
lines is complete.
To Next Page
Loading...
