Setting the Controls
BUILT-IN HUMIDITY CONTROL: An intuitive ‘set and forget’
humidistat is built into the TrueDRY DR65 to set the humidity
level right on the device. Optional external control wiring is also
available. If an external dehumidistat is used, the on-board dehu-
midification control must be set to the Off position.
Control Options
The TrueDRY™ DR65 may be used with one of the following external controls:
HumidiPRO Digital Control
• Manual dehumidification control
• Dehumidifier compressor protection
• RH% and outdoor temperature calibration
• Adjustable high and low range stops (10-90%)
TrueIAQ Digital Control
• Automatic adjustments maintain fresh air in home.
• Sensor for displaying outdoor temperature and humidity.
• Advanced ventilation programming includes economizing and extreme
condition shutdown.
• Maintenance and service reminders.
• Controls other indoor air quality equipment.
Manual Dehumidistat and Automatic Ventilation Controls
• Manual humidity control with intuitive comfort settings.
• Automatic W8150 ventilation control to ASHRAE standard, or for
continuous operation.
Prestige™ IAQ Kit
• Controls both heating/cooling and ventilation.
• Wireless sensor for displaying outdoor temperature and humidity.
• Advanced ventilation programming includes economizing and extreme
condition shutdown.
• Maintenance and service reminders.
• High definition color display.
• RedLINK™ Wireless technology
VisionPRO™ or Prestige™
• Controls both heating/cooling and ventilation.
• Wireless sensor for displaying outdoor temperature and humidity.
• Ventilation programming for time of day or Ashrae standards.
• Optional ventilation lockouts for high/low temp or humidity conditions when
C7089R1013 wireless outdoor sensor is used.
• Wi-Fi™ or RedLINK™ Wireless technology
TrueDRY™ DR65 Dehumidication System 69-2089EFS—14 3
To Next Page
Loading...
Need help?
General
