Rev 1.0 23 Document 900.0840
09/06
6
Controlling the Dome
Now that the dome is connected and configured, it can be controlled from the keyboard.
Perform the following steps to select and control the dome.
1. Press Camera to place the controller in Camera Mode
2. Enter the dome address (1) and press Enter. Camera #1 is switched to the monitor
selected on the keyboard.
3. Use the joystick to move the dome.
4. Zoom by twisting the joystick
When in the Camera Mode, the keyboard enables keys for Dome Control and Adjustment.
• Zoom + to zoom In
• Zoom - to zoom out
• Focus + to control the focus
• Focus - to control the focus
• Iris + to control the iris
• Iris - to control the iris
Note When both the ( + )and ( - ) keys for a function are pressed simultaneously,
the camera goes into automatic mode for that function. For example, press
Iris + and Iris - simultaneously for automatic iris mode.
To Next Page
Loading...
Need help?
General
