Honeywell VideoBloX Quick Start Guide

Rev 1.0 24 Document 900.0840
09/06
Controlling the Dome
Dome Presets
The Dome can be set up for Preset views.
To Store Presets
1. Move the dome to the selected view with the joystick.
2. Press the Alt and the Preset/Save key simultaneously.
3. Enter a number for the preset.
4. Press the Enter key.
5. Repeat for all the presets.
To Recall Presets
1. Press the Preset/Save key.
2. Enter a number corresponding to the required preset.
3. Press the Enter key.
The dome moves to the programmed preset position.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English