Honeywell VideoBloX Quick Start Guide

Rev 1.0 25 Document 900.0840
09/06
7
Simple Alarm Sequence Configuration
The following example configures a simple sequence (event/action).
The first event turns relay #1 on when there is a contact closure on Alarm Input #1.
The second event turns Relay #1 off when there is a Contact Open on Alarm Input #1.
Configuring the Alarm Inputs
1. From the Configuration Program, click on the Alarms tab.
2. Click on the Alarm Inputs button.

Honeywell VideoBloX Specifications

General

Brand	Honeywell
Model	VideoBloX
Category	Matrix Switcher
Language	English