Name: Honeywell VideoBloX
Brand: Honeywell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Rev 1.0 26 Document 900.0840

09/06

Simple Alarm Sequence Configuration

3. Confirm that alarms 1 to 16 and 17 to 32 are marked as "Local". These are the Alarm

Inputs on the Alarm Terminal Box.

4. Close this window.

5. Select Alarm #1 and "check" the Enable box.

6. Go to the Contact Open area and "check" the Enable box

7. Select Sequence #2

8. Go to the Contact Close area and "check" the Enable box

9. Select Sequence #1

10. Click on Download to send configuration to the CPU.

Set to

Local

Questions and Answers:

Need help?

Do you have a question about the Honeywell VideoBloX and is the answer not in the manual?

Honeywell VideoBloX Specifications

General