Honeywell VISTA Series - Password Verification

HoneywellVISTASeriesProductsUserManual

10
Verify
UserID:  00001
Verifi ed!
Iftheverificationfails, thesystemwilldisplaythefollowinginterface:
Aftertheaboveinterfaceisdisplayed0.5seconds,thesystemwillreturntotheinitialinterface.
(2)1:Nfingerprintverifi cation
In the 1:N fingerprint matching mode, the FRT compares the current fingerprint collected through the
fingerprintreaderwithallthefingerprintsstoredintheFRT.
Operationsteps:
Placeyourfingerontheinitialinterfacetodisplaythefollowinginterface:
FPVerify
RemoveFinger
Iftheverificationsucceeds,theinterfacewillbedisplayed:
Verify
UserID:  00001
Verified!
Iftheverificationfails, thesystemwilldisplaythefollowinginterface:
FPVerify
PleaseTryAgn.
Aftertheaboveinterfaceisdisplayed0.5seconds,thesystemwillreturntotheinitialinterface.
3.3.2PasswordVerificatio n
InputyourIDontheinitialinterface.
1:1FPMatch
UserID:00008
ESC(Exit) O K(Y)
PressOKandthefollowinginterfaceisdisplayed.
FPVerify
PleaseTryAgn.