HoneywellVISTASeriesProductsUserManual
18
Thisparameterisusedtosetwhethert oadopttheRS232forcommunications.ToadopttheRS232,setthis
parametertoY;otherwisesetittoN.
9.RS485
Thisparameterisusedtosetwhethert oadopttheRS485forcommunications.ToadopttheRS485,setthis
parametertoY;otherwisesetittoN.
10.COMMKey
Whenthepasswordissetto0,nopasswordisrequiredforcommunication;whenthepasswordissettoa
nonzerovalue,thisvalueisrequiredforcommunicationconnection.
4.4LogSettings
SelectLogOptandtheinformationdisplayedonthescreenissho wninthefollowingfigure:
LogOpt ▼
►AlarmAttLog 99
ReCheckMin 0
1.AlmAttLog
Whentheavailablespaceforstorageofattendancelogsreachesthespecifiedvalue,theFRTautomatically
generatesanalarm.
2.RecheckMin
If auser’s attendancerecordalreadyexistsandtheuserchecksinagainwit hinthespecifiedperiod(unit:
minute),his/hersecondattendancerecordwillnotbestored.
4.5AccessOptions
ê
TheaccesscontrolsettingsarevalidfortheFRTswith professionalaccesscontrolfunctions.Themenuitem
"AccessOptions"isinexistentinthefingerprinttim eattendancemachinesandthedeviceswithsimpleaccess
controlfunctions.
SelectAccessOptionsandtheinformationdisplayedonthescreenisshowninthefollowingfigure:
AccessOptions ▼
►DefTime
UserAccOpts
GRPTimeDef
AccessComb
LockTime 150
DSen.Delay 10
DSen.Mode NO
DSen.Al arm 30
Duress Options
ALARMCNT 0
GroupVerType
TheAccessOptionsincludesthefollowingoptions:
1.DefTP
Definetheunlockingtimesegmentseverydayofaweek.
2.UserAccOpts
Settheunlockingtime,thegroupthattheuserbelongsto,andtheunlockingcombination.
3.GRPTimeDef
Definetheavailabletimesegmentsforusersofacertaingrouptounlock.
4.AccessComb
Definediverseunlockingcombinati ons.Eachcombinationiscom posedofdifferentgroups.
5.LockTime