Honeywell Voyager 1452g Series - Page 166

10 - 12
2D Reread Delay *2D Reread Delay Off DLY2RR0 4-10
Short (1000ms) DLY2RR1000 4-11
Medium (2000ms) DLY2RR2000 4-11
Long (3000ms) DLY2RR3000 4-11
Extra Long (4000ms) DLY2RR4000 4-11
Character Activation Mode *Off HSTCEN0 4-11
On HSTCEN1 4-11
Activation Character HSTACH## 4-11
Do Not End Character Activation After Good
Read
HSTCGD0 4-12
*End Character Activation After Good Read HSTCGD1 4-12
Character Activation Laser Timeout (Range
1 - 65525) *5000 ms
HSTCDT##### 4-12
Character Deactivation Mode *Off HSTDEN0 4-12
On HSTDEN1 4-12
Deactivation Character HSTDCH## 4-12
User-Specified Reread Delay Range 0 - 30,000 ms DLYRRD##### 4-10
Illumination Lights *Lights On SCNLED1 4-13
Lights Off SCNLED0 4-13
Aimer Delay 200 milliseconds SCNDLY200 4-13
400 milliseconds SCNDLY400 4-13
*Off (no delay) SCNDLY0 4-13
User-Specified Aimer Delay Range 0 - 4,000 ms SCNDLY#### 4-13
Aimer Mode Off SCNAIM0 4-13
*Interlaced SCNAIM2 4-14
Centering Window Centering On DECWIN1 4-14
*Centering Off DECWIN0 4-15
Left of Centering Window (*40%) DECLFT### 4-15
Right of Centering Window (*60%) DECRGT### 4-15
Top of Centering Window (*40%) DECTOP### 4-15
Bottom of Centering Window (*60%) DECBOT### 4-15
No Read On SHWNRD1 4-15
*Off SHWNRD0 4-15
Video Reverse Video Reverse Only VIDREV1 4-16
Video Reverse and Standard Bar Codes VIDREV2 4-16
*Video Reverse Off VIDREV0 4-16
Working Orientation *Upright ROTATN0 4-17
Vertical, Bottom to Top (Rotate CCW 90°) ROTATN1 4-17
Upside Down ROTATN2 4-17
Vertical, Top to Bottom (Rotate CW 90°) ROTATN3 4-17
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 5-2
Prefix Add Prefix PREBK2## 5-2
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page