Honeywell XENON 1902 - MicroPDF417 Message Length; GS1 Composite Codes; UPC;EAN Version

1 - 10
Connecting with RS485
A Xenon scanner or cordless base can be connected for an IBM POS ter-
minal interface. (This interface is not available in the Granit devices.)
1. Connect the appropriate interface cable to the device, then to the com-
puter.
Note: The power supply must be ordered separately, if needed.
Corded Xenon Scanner
RS485 Connection:
CCB01-010BT Base
RS485 Connection: