6 Xenon/Granit User Guide
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with
a USA keyboard. A carriage return (CR) suffix is added to bar code data.
Connect with RS232 Serial Port
1. Turn off power to the terminal/computer.
2. Connect the appropriate interface cable to the scanner.
Note: For the scanner or cordless base to work properly, you must have the correct cable for
your type of terminal/computer.
Corded Xenon Scanner
RS232 Serial Port
Connection:
Corded Granit Scanner RS232 Serial
Port Connection:
To Next Page
Loading...
