Honeywell XENON 1902G-BF - RS232 Modifiers; RS232 Baud Rate

34 Xenon/Granit User Guide
Automatic Direct Connect Mode: This selection can be used if you have an IBM AT
style terminal and the system is dropping characters. Default = Off.
RS232 Modifiers
RS232 Baud Rate
Baud Rate sends the data from the scanner to the terminal at the specified rate.
The host terminal must be set for the same baud rate as the scanner. Default =
115,200.
Numeric Keypad Mode On
* Numeric Keypad Mode Off
Automatic Direct Connect
Mode On
* Automatic Direct Connect
Mode Off
300
600
1200
2400