Hongqi E-HS9 User Manual (English)

Questions and Answers:

J
joshua94Jul 29, 2025
What to do if my Hongqi E-HS9 is unable to start charging?
- C
  Corey MendozaJul 29, 2025
  There are several reasons why your Hongqi Automobile might not start charging. It could be due to: * The battery temperature being too high or too low. If the instrument cluster shows a prompt about this, wait until the temperature normalizes before charging. * The power battery being sufficiently charged or the current battery level is higher than the charge limit. Charging is restricted when the battery is already full or exceeds the limit. * A low 12V battery level. If this is the case, contact an authorized FAW Hongqi dealer. * A vehicle fault. Check if the MIL (Malfunction Indicator Lamp) on the instrument cluster is lit. If it is, stop charging and contact an authorized FAW Hongqi dealer.
S
Seth ThomasAug 4, 2025
What to do if charging stops during AC charging of my Hongqi E-HS9 Automobile?
- S
  Sarah Scott MDAug 4, 2025
  If AC charging stops unexpectedly on your Hongqi Automobile, it could be due to: * An interruption in the AC power supply. If the power supply is restored, you will need to restart the charging process. * The power socket ceasing to output power. If the power returns, your vehicle might automatically resume AC charging. * A disconnected charging cable. Ensure the cable is securely connected. * Reaching the end of the charging time in timed charging mode. Charging will stop if the set end time is reached. * A vehicle fault. Check the MIL on the instrument cluster. If illuminated, stop charging and contact an authorized FAW Hongqi dealer.
A
Amber OlsonAug 10, 2025
What to do if charging stops during DC charging of my Hongqi Automobile?
- M
  Matthew LarsonAug 10, 2025
  If your Hongqi Automobile stops charging during DC charging, it might be caused by: * A communication fault between the DC charging equipment and the vehicle. Try reconnecting the charging plug and restarting. If the issue persists, use a different DC charging pile. * Simultaneous connection of both AC and DC charging devices. Disconnect one of them. * A vehicle fault. Check if the MIL on the instrument cluster is illuminated. If it is, stop charging immediately and contact an authorized FAW Hongqi dealer.
M
Michael PooleAug 16, 2025
Why is my Hongqi E-HS9 Automobile unable to start AC charging?
- J
  Joseph SmithAug 16, 2025
  Your Hongqi Automobile might fail to start AC charging due to several reasons: * The vehicle plug might not be securely connected. Ensure it's properly connected and that the charging connection indicator on the instrument cluster is illuminated. * The AC charging device might not be powered. Verify that the device is receiving power and start charging according to its instructions. * The power socket might not be powered. Check the power supply indicator on the control box. * The charging plug might not be reliably connected to the power socket. Ensure a secure connection, using a household or industrial electrical socket (230V). * The charging mode might be set to timed charging. Switch to immediate charging mode.
J
James BarnesAug 22, 2025
What to do if my Hongqi Automobile is unable to start DC charging?
- E
  Erik ButlerAug 22, 2025
  If your Hongqi Automobile won't start DC charging, consider these possibilities: * The vehicle plug isn't reliably connected. Ensure it's firmly in place and that the charging connection indicator on the instrument cluster lights up. * The DC charging equipment's parameters don't match the vehicle's. If the instrument cluster displays a message about this, try a different DC charging station. * The DC charging device isn't powered. Confirm that the equipment has power and follow its instructions to initiate charging.

Hongqi E-HS9 Specifications

General

Brand	Hongqi
Model	E-HS9
Category	Automobile
Language	English

Hongqi E-HS9 User Manual

Table of Contents

Questions and Answers:

Hongqi E-HS9 Specifications