Hoover UH40155 User Manual (English)

Questions and Answers:

H
Heather PetersJul 31, 2025
Why Hoover Vacuum Cleaner won't turn on?
- G
  Gregory EllisJul 31, 2025
  If your Hoover Vacuum Cleaner isn't running, there are several potential causes. First, make sure the unit is firmly plugged into the wall. Check your fuse or breaker to ensure there's voltage in the wall plug. A blown fuse or tripped breaker could also be the issue, so replace the fuse or reset the breaker. Finally, the thermal protector may have activated; allow the cleaner to cool for 30 minutes to reset it.
D
Daniel SchultzAug 7, 2025
What to do if Hoover Vacuum Cleaner won't pick up?
- C
  Craig SmithAug 7, 2025
  If your Hoover Vacuum Cleaner isn't picking up dirt, consider these possibilities: * The dirt cup might be full, so empty it. * The pleated filter could be clogged; clean the pleated filter. * There might be a blockage in the air flow passage; clear any blockage. * The dirt cup might not be properly installed; position it correctly and lock it in place. * The filter chamber lid might not be positioned properly or is missing; ensure it is correctly positioned. * The filter assembly may not be installed properly; ensure it is correctly positioned. * The belt might be broken or worn; replace the belt. * The agitator brush roll might be worn; replace the brush roll. * The carpet height setting might be incorrect; move the carpet height control to a lower setting.
S
Stephanie SheaAug 15, 2025
How to make Hoover UH40155 Vacuum Cleaner easier to push?
- E
  Eric BeckerAug 15, 2025
  If your Hoover Vacuum Cleaner is hard to push, the carpet height setting might be incorrect. Move the carpet height control to a higher setting.
N
Natasha RayAug 23, 2025
Why does my Hoover UH40155 Vacuum Cleaner smell like it's burning?
- C
  Christopher RomeroAug 23, 2025
  A smoky or burning smell from your Hoover Vacuum Cleaner often indicates that the agitator brush roll belt is broken or stretched. Replace the agitator brush roll belt.