HP 1650B

OTlMe
OTIMe command/query
The OTIMe command positions the 0 Marker on the timing waveforms in
the mixed mode display. If the data is not valid, the command performs
no action.
The OTIMe query returns the 0 Marker position in time. If data is not
valid, the query returns 9.9E37.
Command Syntax: :WLISt:OTIMe <time-value>
where:
c time value > :: = real number
Example: OUTPUT XXX,“:WLIST:OTIME 40.Oe-6”
Query Syntax: :WLISt:OTIMe?
Returned Format: [:WLISt:OTIMe] c time-value > < NL>
Example:
10 DIM To$[lOO]
20 OUTPUT XXX;“:WLIST:OTIME?”
30 ENTER XXX;To$
40 PRINT To$
50 END
HP 1650B/HP 16518
Programming Reference
WLlSt Subsystem
9-5