HP 1650B

XTIMe
XTIMe
command/query
The XTIMe command positions the X Marker on the timing waveforms in
the mixed mode display. If the data is not valid, the command performs
no action.
The XTIMe query returns the X Marker position in time. If data is not
valid, the query returns 9.9E37.
Command Syntax: :WLISt:XTIMe dime-value >
where:
c time-value > :: = real number
Example: OUTPUT xXX,“:WLIST:XTIME 40.OE-6”
QIJt?ry Syntax: :WLISt:XTIMe?
RetUrned Format: [:WLISt:XTIMe] <time-value> <NLz=
Example: 10 DIM Tx$[lOO]
20 OUTPUT XXX;“:WLIST:XTIME?”
30 ENTER XXX;Tx$
40 PRINT Tx$
50 END
WLlSt Subsystem
9-6
HP 1650B/HP 165113
Programming Referencle