HP 1650B - Rst

*RST
*RST (Reset) command
The *RST command (488.2) sets the HP 1650B/51B to the power-up
default settings as if no autoload file was present.
The changes include:
l System Configuration menu is brought up
l Machine 1 is a timing analyzer, with auto-scale on
l Machine 2 if off
l Pod 1 is assigned to Machine 1
l Pods 2,3, and 4 are unassigned
l Pod 5 is assigned to Machine 2
Command Syntax: *FIST
Example:
OUTPUT XXX;"*RST"
Common Commands
6-10
HP 1650B/HP 16518
Programming Reference