HP 1650B

ARM
ARM
command/query
The ARM command specifies the arming source of the specified analyzer
(machine).
The ARM query returns the source that the current analyzer (machine)
will be armed by.
Command Syntax:
:MACHine{ 1 IP}:ARM <arm-source >
where:
c arm-source > :: = {RUN 1 MACHine{ 112) 1 BNC}
Example: OUTPUT XXX;“:MACHINEl:ARM MACHINE2”
Query Syntax: : MACHine { 112}:ARM?
Returned Format: [:MACHine { 112}:ARM] c arm-source > -z NL>
Example: 10 DIM Stringt [lOO]
20 OUTPUT xxx; “:MACHINEl:ARM?”
30 ENTER Xxx; String$
40 PRINT String$
50 END
MACHine Subsystem
IO-4
HP 165OB/HP 16518
Programming Reference