HP 1650B - Page 266

OTIMe
OTIMe
command/query
The OTIMe command positions the 0 marker in time when the marker
mode is TIME. If data is not valid, the command performs no action.
The OTIMe query returns the 0 marker position in time. If data is not
valid, the query returns 9.9E37.
Command Syntax:
:MACHine{l IP}:TWAVeform:OTIMe <time-value>
where:
<time-value > :: = real number -2.5Ks to +2.5Ks
Example: OUTPUT XXX;
":MACHINEl:TWAVEFORM:OTIME 30.OE-6"
Query Syntax:
:MACHine{lI2}:TWAVeform:OTIMe?
Returned Format:
[:MACHine{l [2}:TWAVeform:OTIMe] <time-value> <NLz-
Example: 10 DIM Ot$ [IO01
20 OUTPUT XXX;"
:MACHINEl:TWAVEFORM:OTIME?"
30 ENTER XXX; Ot$
40 PRINT Ott
50 END
TWAVeform Subsystem
19-14
HP 1650B/HP 16518
Programming Reference