HP 1650B

Figure A-26. c definite length arbitrary block response data >
i 1
HP 1650B/HP 16518
Programming Reference
Where c ASCII data byte > represents any ASCII-encoded data byte except
c NL > (CM, 10 decimal).
Notes
1. The END message provides an unambiguous termination to an element
that contains arbitrary ASCII characters.
2. The IEEE 483.1 END message serves the dual function of terminatii
this element as well as terminating the < RESPONSE MESSAGE > .
It is only sent once with the last byte of the indefinite block data. The
NL is present for consistency with the
c RESPONSE MESSAGE TERMINATOR > . Indefinite block data
format is not supported in the HP 1650B/1651B.
Figure A-27. c arbitrary ASCII response data >
Message Communication and System Functions
A-25